Louise RC ST-Pioneer 3.2″ Truggy Tires – Black-Chrome Beadlock – 1/2 Offset – Soft – (2)

These 1/10 stadium truck tires offers good forward traction on most loose surfaces. They are equipped with the latest MFT tire technology with an molded-in cord that helps reduce any over-ballooning that is hurting performance due to less contact patch to the surface you drive on. To top it off Louise have also included an over sized 3.2″ wheel with an bead-locking ring on each side that is hold in place with ten screws per side – no glue joint that can tear apart!

Tire Features:

• MFT (Micro Fiber Tech)
• Less Ballooning
• More rigid overall structure
• Less distortion
• Stable and even contact with the road/off-road surface
• Larger outer diameter vs normal 2.8″ ST tires

Wheel Features:

• Over-Sized 3.2″ diameter
• Bead-lock System
• Rigid locking ring that securely locks the tyre bead to the wheel with 2x10pcs M3x6mm hex screws without using a tyre glue

Fits:

• Traxxas RUSTLER 2WD Front
• Traxxas RUSTLER VXL 2WD Front
• Traxxas STAMPEDE 2WD Front
• Traxxas STAMPEDE VXL 2WD Front
• Traxxas SKULLY 2WD Front
• Traxxas CRANIAC 2WD Front
• Traxxas STAMPEDE 4×4 Front & Rear
• Traxxas STAMPEDE VXL 4×4 Front & Rear
• Traxxas JATO 2WD Rear
• Traxxas Nitro STAMPEDE 2WD Rear
• Traxxas Nitro RUSTLER 2WD Rear
• Traxxas Nitro Sport SE 2WD Rear
• Also fits other 1/10 Scale Trucks (stadium & monster) with 12 mm hex

Specs:

• Wheel diameter: 3.2″
• Tire Diameter: 121 mm
• Tire Width: 56.5 mm
• Weight (each): 193 g
• Hex: 12 mm
• Offset: +1/2″
• Tire Compound: Soft
• Tire Tech: MFT (Micro Fiber Technology)
• Wheel Finish: Black-Chrome Nylon
• Wheel Type: Bead-Lock with 2x10pcs of M3x6mm hex screws
• Foam: Yes
• Glued: No

Notes:

• Check the over all gearing as these tires may be larger in diameter vs a normal 1/10 Stadium Truck tire which may need a smaller motor pinion gear
• We recommend updating your steering servo when using these tyres as they provide more grip and may overload a standard servo