DDM .012″ (.300mm) Copper Cylinder Gasket For RC Engines

High-compression, reuseable thin copper cylinder gasket. Copper gasket is .012” (.30mm) thick – stock gasket is .020” (0.50mm) thick. Installing this gasket reduces the squish clearance in your engine – usually the easiest way to increase power and reliability of a small 2-stroke engine. You should experience a slight improvement in low end torque and throttle response as well as slightly increased top end RPMs. DDM recommends using 95 octane or higher fuel after installing this gasket.
Note: Be sure to check your squish clearances when using this gasket. Failure to maintain proper squish clearance can result in the piston hitting the top of the cylinder, severely damaging or destroying your engine.

Stock part on the
G230RC
G260RC

Can be used on
CY23RC
CY26RC
CY27RC
CY29RC
GP290